A Guide to Growing Plants with LED Grow Lights

A Guide to Growing Plants with LED Grow Lights

If you have an indoor garden and love the idea of growing your favorite plants indoors, then you must know that taking up such a project wouldn’t be possible without the best set of grow lights. After you invest in the best quality LED grow lights, you have to pay attention to the nutrients, and consider several other factors that will play a role or contribute to the healthy growth of the plants.

As mentioned, you will need good quality LED grow lights. When you use these lights, you must follow some essential growing tips. You need to plan the growth phase well, pay special attention to various factors, which should guarantee that the plants reach their full growth potential.

A common mistake that indoor growers make is not paying attention to the amount of light their plants require, or the appropriate distance.

The Temperature

One of the main benefits of growing with LED grow lights is their lower heat output. Under these lights, it is easier to remove excess heat and maintain a stable temperature in the growing area. The ideal stable temperature for the grow room is around 70-85 degrees. During the off period, the temperatures will go lower, at the time when the lights are not in use.

The Light Distance is Crucial

Note that when growing plants under these lights, placing them too close or far from the plants will have a great impact. If the lights are too close to the plants, it will lead to stunted plant growth. If they are too far, it will cause the plants to become weaker and stretched. When you invest in G8 LED Dorm Grow lights, make sure that you follow the recommended coverage areas and light hanging distance for optimal penetration and coverage.

When LED grow lights are too close to plants, they could have a bleaching effect on the plant leaves. However, lower wattage lights with less intensity can be closer to the plants and still be safe for them. Just make sure that you follow the right lighting distance requirements. They should be placed in a sweet spot zone. When referring to the sweet spot, this refers to an ideal range of distances where the plants receive just the required amount of light.

With G8 LED grow lights, the right light distance should be:

  • 12-24 inches under G8-240
  • 14-30 Inches under the G8-450
  • 16-36 inches under the G8-600
  • 16-36 inches under the G8-900
  • 12-36 inches under Flower Booster

If you wish to have tall plants, keep raising the grow light as the plants grow towards it. For shorter and bushier plants, you should decrease the light distance. However, for a stable or intermediate height, keep the distance fixed, and the plants will eventually reach a fixed height.

Watering Schedule

Since LED grow lights are low heat emission devices, putting off about 10% of the heat output of HPS bulbs, it means plants grown with them will require less water. The lower the heat emission, the less the need to water plants because of lower evaporation rate from the surface of the plants and the soil. When you grow plants in a soil medium, it is best to water them every 2-4 days, or when the topsoil is dry.

Furthermore, you have to consider the growth cycle of the plants. In their vegetative cycle, you should give them about 18 hours of light. During flowering, plants should receive 12 hours of light. Doing so helps to maintain proper work and rest times and ensures the optimum yields.

For any indoor project, regardless of whether you wish to grow vegetables or your favorite flowers, growing under LED grow lights is the preferred choice. Follow our guide to have successful indoor grows with your LED grow lights.

Facebooktwittergoogle_plusredditpinterestlinkedinmail

Admin

It’s good to see you here. I’m providing guest posting services for all type of Category (Casino, Business, Finance, Technology, Education, and many more).If you need to require any kind of services related to these Categories please contact me .Thank you so much.

Leave a Reply

Your email address will not be published. Required fields are marked *